Pin-to-pin compatible with Atmel's 128-Kbyte AVR CAN microcontroller (AT90CAN128), the AT90CAN32/64 devices integrate in a single chip, a V2.0A/V2.0B CAN controller, a 32-/64-Kbyte Flash program memory, a 2-/4-Kbyte RAM, and a 1- /2-Kbyte on-chip EEPROM. With a 16 MIPS AVR RISC-engine, the AT90CAN32/64 devices offer designers a performance equivalent to a 16-bit microcontroller at the price of a standard 8-bit device for their Industrial Control applications.

The on-chip CAN controller can handle 15 independent message objects, programmable on-the-fly, and dynamically assign them to the reception, transmission or reception buffers in case of multiple CAN frames. Extensive masking, filtering and buffering of CAN frames reduces the host processor load. A large portion of the AT90CAN32/64 processing speed and memory remains available for the application while a complete higher layer protocol stack (CANopen, DeviceNet(TM) or J1939) runs on the chip. An interrupt accelerator engine informs the CPU of critical messages without running a software scan routine, minimizing the overhead impact on real time event applications.

A highly flexible IAP capability, via CAN, UART or SPI, allows remote programming and field upgrades. Atmel's IAP allows to simply reprogram any CAN node through the CAN bus, without disturbing the CAN bus exchanges, or interrupting the running system. In comparison, the so-called IAP capabilities available on the market require a manual operation to stop the system, to shift the system to the programming mode and to re-start it. Atmel offers a library of IAP routines as well as running Bootloader examples to customers wanting to build their own Bootloaders, thereby reducing overall development time and thus time-to-market.

AT90CAN32/64 peripherals include 16-bit timers with enhanced Pulse Width Modulation capabilities, a powerful 10-bit/8-channel A/D converter and several serial interfaces. A wide operating voltage range (2.7V-5.5V) plus five low- power management modes optimize the application power consumption.

Manish Vadher, Atmel's marketing director said, "After a successful introduction of the AT90CAN128 AVR CAN microcontroller, Atmel is now expanding the AVR CAN family. The AT90CAN32/64 are highly cost-effective solutions and fully compatible with the larger AT90CAN128. These new AVRs with a CAN controller offer an unrivalled feature set and confirm our commitment to the CAN networking market."

The stand-alone development kit, ATDVK90CAN1, is available for $115. This allows the user to start a development and then easily port the software onto an application. It can be used to evaluate the performance as well as to demonstrate CAN features. With the kit, Atmel also provides a C-code driver library for all peripherals including the CAN-driver and various program examples.

Atmel's AT90CAN128 starter kits, which include the ATSTK500/501 and the ATADAPCAN01 also offer an easy way to get started with the new AT90CAN32/64 devices.

AT90CAN32/64 samples are available now in TQFP and QFN 64-pin packages in industrial temperature range. AT90CAN32 production volumes are expected in December 2005, and in March 2006 for the AT90CAN64. Pricing for 10,000 units is $4.50 per unit for the AT90CAN32, and will be $5 for the AT90CAN64.

About Atmel

Atmel is a worldwide leader in the design and manufacture of microcontrollers, advanced logic, mixed-signal, nonvolatile memory and radio frequency (RF) components. Leveraging one of the industry's broadest intellectual property (IP) technology portfolios, Atmel is able to provide the electronics industry with complete system solutions. Focused on consumer, industrial, security, communications, computing and automotive markets, Atmel ICs can be found Everywhere You Are(R).

(C) Atmel Corporation 2005. All rights reserved. Atmel(R), logo and combinations thereof, Everywhere You Are(R), AVR(R) and others, are registered trademarks, or trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others.

     Information:
     Atmel's AT90CAN32 product information may be retrieved at
     http://www.atmel.com/dyn/products/product_card.asp?PN=AT90CAN32
     http://www.atmel.com/dyn/products/product_card.asp?PN=AT90CAN64

For further information on CAN microcontroller family, go to http://www.atmel.com/products/CAN/

     Press Contacts:
     Philippe Faure, Marketing Communication Manager - Microcontrollers
     Phone: +33 2 40 18 18 87, Email: Email Contact
     Helen Perlegos, Public Relations - USA and Asia Pacific Rim,
     Phone: (+1) 408 487-2963, Email: Email Contact
     Veronique Sablereau, Corporate Communications Manager - Europe
     Phone: +33 1 30 60 70 68, Fax: + 49 71 31 67 24 23
     Email:  Email Contact

CONTACT: Philippe Faure, Marketing Communication Manager -
Microcontrollers, +33 2 40 18 18 87, or Email Contact; all of Atmel Corporation

Web site: http://www.atmel.com/